SPETEC® ITS

SPETEC® ITS is a yellow circular injection tube consisting of A reinforcing steel spiral wire that prevents that the hose would collapse under the weight of the concrete during concreting, ensuring that the injection canal does not get blocked. A non-woven filtrating membrane preventing the small cement particles to enter the injection tube during concreting and allowing the resin to flow out over the entire skin of the injection tube.A protective outer synthetic membrane. SPETEC® ITS can be injected with SPETEC® PU F400, SPETEC® PU H100 or SPETEC® GT350

ADVANTAGES
  • Easy to install, no special tools required.
  • Complete system, delivered with all necessary accessories.
  • The hose can be adjusted to the correct length on site.
  • Due to the metal spiral core the hose keeps its inner diameter when bended.
  • Low pressure injection possible.
  • Can be injected preventatively or when leakages actually occur.
  • After injection the joint is permanently sealed.
  • Injection is done continuously over the porous surface of the tube, not via points or slits resulting in a more even distribution of the resin in the joint.
  • No leak, no injection necessary.
  • There is no interruption of the construction activities when SPETEC® ITS is installed.
FIELD OF APPLICATION
SPETEC® ITS is an injection tube system that allows injection of cold and construction joints via a pre-installed injection canal. SPETEC® ITS is installed in construction joints in concrete, pipe penetrations and voids between secant piles walls and slabs, and so on.
SPETEC® ITS can be combined with other preventative waterproofing systems like swelling bars and PVC water stops. The joint can be injected with the appropriate SPETEC® Injection resin preventatively after the concrete has fully cured or in case a leak appears.
ACCESSORIES

Appropriate injection resin SPETEC® PU F400, SPETEC®PU H100 or SPETEC® PU GT350 must be order separately. See Technical Data Sheet.

Download technical / safety sheet
SPETEC® ITS
TDS